Norsonic NOR1217 Outdoor Microphones

Explore the Norsonic NOR1217 Outdoor Microphones — engineered for precise, standards-compliant acoustic measurements. Features Outdoor microphone for community and aircraft noise. Fulfils IEC 60651, IEC 61672 class 1 and ANSI S1.4 type 1 (when used with Nor140, Nor145 and Nor150 sound level meters). Protection class IP 55 (dust and water). Easy to calibrate with a normal ½” sound calibrator. Microphone verification by SysCheck facility. Low self-noise – typically below 17 dB, A-weighted. Directly powered and supported by Nor140 and Nor150 (built in selectable frequency correction networks and SysCheck signal generator). Low cost. Use microphone and preamplifier supplied with Nor140, Nor145 and Nor150. Approved by PTB, Germany. Specifications Acoustic performance: IEC 60651, IEC 61672 class 1 and ANSI S1.4 type 1 (frequency correction applied) with a suitable instrumentMax Sound pressure level: >140 dB peak dependent on supply voltage. Microphone cartridge: Nor1227 or Nor1225 (1/2” 50 mV/Pa) Polarization voltage: 0 volt (Nor1227) 200V (Nor1225) Inherent noise: < 17 dB A-weighted Reference direction: Vertical or horizontaldependent on the applied frequency correction Ingress Protection Category: IP55 according to IEC 60529. Supply voltage: ±14 volt to ±60 volt Current consumption: 1,5mA Connector: 7 pin Lemo type 1B male Temperature range: -40ºC to +85ºC Height: 395 mm / 15.5”(without tripod adapter) Diameter: Approx 80 mm / 3.1” (with windshield) Weight: Approx 300 g (with preamp microphone) Mounting thread: 3/8” UNC

SKU: Norsonic NOR1217 Outdoor Microphones Category: Tags: , , Brand:
Description

Explore the Norsonic NOR1217 Outdoor Microphones — engineered for precise, standards-compliant acoustic measurements.

Features

    • Outdoor microphone for community and aircraft noise.
    • Fulfils IEC 60651, IEC 61672 class 1 and ANSI S1.4 type 1 (when used with Nor140, Nor145 and Nor150 sound level meters).
    • Protection class IP 55 (dust and water).
    • Easy to calibrate with a normal ½” sound calibrator.
    • Microphone verification by SysCheck facility.
    • Low self-noise – typically below 17 dB, A-weighted.
    • Directly powered and supported by Nor140 and Nor150 (built in selectable frequency correction networks and SysCheck signal generator).
    • Low cost. Use microphone and preamplifier supplied with Nor140, Nor145 and Nor150.
    • Approved by PTB, Germany.





Specifications

Acoustic performance: IEC 60651, IEC 61672 class 1 and ANSI S1.4 type 1 (frequency correction applied) with a suitable instrumentMax Sound pressure level: >140 dB peak dependent on supply voltage.
Microphone cartridge: Nor1227 or Nor1225 (1/2” 50 mV/Pa)
Polarization voltage: 0 volt (Nor1227) 200V (Nor1225)
Inherent noise: < 17 dB A-weighted
Reference direction: Vertical or horizontaldependent on the applied frequency correction
Ingress Protection Category: IP55 according to IEC 60529.
Supply voltage: ±14 volt to ±60 volt
Current consumption: 1,5mA
Connector: 7 pin Lemo type 1B male
Temperature range: -40ºC to +85ºC
Height: 395 mm / 15.5”(without tripod adapter)
Diameter: Approx 80 mm / 3.1” (with windshield)
Weight: Approx 300 g (with preamp microphone)
Mounting thread: 3/8” UNC


Ordering & Support
  • Office: (+66) 02-1206757
  • LINE: @placid